How to Replace Your AeroPress Go Chamber
By AeroPress Coffee Makers | The French Press Alternative | Published: 2026-10-30
Category: How-to Guides
A quick step-by-step guide to swapping the chamber on your AeroPress Go. Restore full brewing function in minutes with a genuine replacement part.
Quick answer
Replacing the chamber on your AeroPress Go is a straightforward swap that takes just a minute. You only need the new AeroPress Go Chamber and your existing plunger.
When you need to replace the chamber
The chamber is the main brewing body of your AeroPress Go. If it cracks, warps, or goes missing, your brewer can't hold water or create a proper seal for pressing. A replacement chamber restores full function without buying a whole new unit.
This guide covers the AeroPress Go model. The process is slightly different from the Original or XL chambers, so make sure you have the Go-specific part.
Step-by-step replacement process
- Remove the old chamber: Unscrew the cap and set aside the filter and filter cap. Press the plunger through the old chamber to push out any leftover coffee grounds. Rinse the plunger and set it aside. Discard the damaged or missing chamber. If the old chamber is cracked, wear gloves to avoid sharp edges.
- Attach the new chamber: Take the new AeroPress Go Chamber and slide the plunger into the wide open end. Push it all the way through until the plunger seal reaches the bottom of the chamber. The chamber should sit snugly against the plunger flange. Make sure the plunger seal is not twisted or folded as you push it through.
- Install the filter and cap: Place a fresh paper filter (or your reusable filter) into the cap. Screw the cap onto the narrow end of the chamber. Your AeroPress Go is now ready to brew. Double-check that the cap is threaded evenly to avoid leaks during pressing.
Product fact
- AeroPress Go Chamber: The AeroPress Go Chamber is a genuine replacement part designed specifically for the AeroPress Go model. Using the correct model ensures a proper fit with your plunger and cap, so you get the same brewing performance as the original.
AeroPress Go Chamber
