Coffee Station Bundle - Premium: Setup and Daily Workflow

Quick answer

Set up your AeroPress Premium Coffee Station Bundle by unboxing and arranging all components, then follow a consistent daily workflow: prep the station, heat water, grind coffee, brew, and clean. This routine ensures smooth, rich, grit-free coffee every time.

Step-by-step setup and daily workflow

1. Unbox and inventory all components: Open the AeroPress Premium Coffee Station Bundle on a clean, flat surface. Remove all items and check them against the included list. Keep the packaging until you’re sure nothing is missing. Missing or damaged parts? Contact support before first use.
2. Wash the brewer and accessories: Hand wash the glass and metal parts of the AeroPress Premium with warm water and mild dish soap. Rinse thoroughly and dry with a soft cloth. Avoid abrasive cleaners that could scratch the glass or anodized aluminum. Never put the glass carafe or metal components in the dishwasher unless the manual explicitly says they are dishwasher-safe.
3. Choose and prepare your station location: Pick a spot near an outlet if you use an electric kettle, with enough counter space for the brewer, cups, and accessories. Place a non-slip mat or towel under the station to protect surfaces and prevent sliding. Keep the station away from the edge of the counter to reduce the risk of knocking over the glass brewer.
4. Assemble the AeroPress Premium for brewing: Following the included instructions, insert the filter into the cap and attach it to the chamber. Place the chamber on your cup or carafe. Make sure all connections are secure but do not overtighten. Check that the filter is centered and flat; a misaligned filter can cause grit in your cup.
5. Set up your daily brewing workflow: Establish a repeatable sequence: fill the kettle and start heating water, weigh and grind coffee, then brew. Keep your most-used tools—grinder, scale, stirrer, and cups—within arm’s reach to minimize movement. Grind size matters: use a medium-fine grind similar to table salt for AeroPress. Adjust slightly coarser if the plunge feels very hard.
6. Brew and plunge with care: Add coffee and water according to your recipe, stir gently, and steep. When plunging, press slowly and steadily. Stop when you hear a hiss to avoid over-extraction and bitterness. If the plunge is difficult, your grind may be too fine or you may be using too much coffee. Adjust and try again.
7. Clean immediately after brewing: Once you’ve finished, remove the cap and rinse the filter and chamber under warm water. Wipe the glass and metal parts dry to prevent water spots. Disassemble any removable parts for a thorough clean. Do not let coffee residue dry inside the brewer; it becomes harder to remove and can affect flavor.

Product facts

• Coffee Station Bundle - Premium: The AeroPress Premium coffee maker in this bundle is made with borosilicate glass, stainless steel, and anodized aluminum. These materials mean the brewer is heavier and more fragile than plastic models, so handle it carefully and place it on a stable, non-slip surface.